Shaft cleaning

For the daily cleaning of the becue shafts it is recommended to use a cloth simply soaked in water and neutral soap.
Avoid solvents, alcohol or any other aggressive product.
Carbon fiber, unlike wood, is not absorbent, and therefore does not absorb dirt like a wooden shaft, but remains only trapped in surface microporosities, and for a thorough cleaning (twice a year), to remove grease, dirt and sweat, we recommend using a 1500/2000 grid sandpaper, then wipe a cloth soaked in water and neutral soap, and finally give a pass of specific black polish.

Tip replacement

Although the tip replacement does not have particular needs or precautions compared to a conventional shaft, we recommend to contact a professional installer for the replacement of the tip.
The shaft performance and its mechanical characteristics are guaranteed if the thickness of the ferrule is equal to or greater than 2.5 mm.
The reduction in thickness below 2.5 mm will invalidate the guarantee.

Butt cleaning

For the Daily cleaning of the Butt and every part of it, it is recommended to use a cloth simply soaked in water and neutral soap.
Avoid solvents, alcohol or any other aggressive product.

Warnings

The maintenance of the cue or any component thereof, carried out in contravention of the foregoing, will invalidate the warranty against any damage caused by inadequate or not expressly cited procedures.